Skip to main content
Maintenance Procedure
Mitsubishi Outlander 2012-2020

Mitsubishi Outlander (2012–2020) Auto Stop & Go — How to Turn It Off and On

How to switch the AS&G (Auto Stop & Go) engine start/stop system off and back on the third-generation Mitsubishi Outlander, and why it resets to on at every start.

Make
Mitsubishi
Model
Outlander
Years
2012-2020
Procedure
Auto Stop & Go (AS&G) On & Off
Quick answer

Press the 'AS&G OFF' button on the dashboard of the 2012–2020 Mitsubishi Outlander to switch the automatic engine stop/start off; an indicator light confirms it is disabled. The setting only lasts for the current drive — AS&G turns itself back on every time you restart the engine, and there is no factory way to keep it off permanently.

Overview

Auto Stop & Go (AS&G) is Mitsubishi's fuel-saving system that shuts the engine off when the car is stationary and restarts it as you pull away. On the third-generation Outlander it is armed automatically at every start and shown by an 'A' inside a circular arrow in the instrument cluster. Mitsubishi provides only a temporary off switch, because the system is intended to be left running.

Applies to

2012–2020 Mitsubishi Outlander (third generation, GF/GG) with the AS&G idle stop/start system. Petrol models; the PHEV uses a different hybrid strategy. Button placement can vary by trim and market.

What you’ll need

  • No tools required — this is a dashboard button

Step-by-step

  1. Find the AS&G OFF buttonIt is labelled 'AS&G OFF' with an 'A'-in-a-circular-arrow symbol, on the driver-side dashboard switch panel near the steering column.
  2. Press AS&G OFF with the engine runningA single press disables the system; an indicator light comes on to confirm AS&G is off.
  3. Confirm it is offThe engine will no longer shut down when you stop; the auto-stop symbol is no longer active.
  4. Re-enable when you want it backPress AS&G OFF again, or restart the car — the system re-arms on the next engine start.

Important

  • The off state does not stick — AS&G re-arms every time you start the engine, so you must press AS&G OFF again each drive if you want it off.
  • There is no factory menu or coding option to disable AS&G permanently; only dealer-level configuration or aftermarket hardware could, with a warranty risk.
  • AS&G will not stop the engine when the battery charge is low, the cabin is still heating or cooling, or the engine is cold — that is normal, not a fault.

FAQ

Can I turn Outlander AS&G off permanently?

Not with a factory setting. The Outlander re-arms AS&G at every start and offers no persistent menu option. Lasting solutions are aftermarket modules that carry a warranty risk.

Why does the engine keep switching itself off at junctions?

That is AS&G working normally — it stops the engine at a standstill to save fuel and restarts it when you move off. Press AS&G OFF to stop that behaviour for the drive.

Is frequent auto start/stop bad for the engine?

Cars fitted with AS&G use a heavier-duty starter and battery designed for repeated restarts, so ordinary use is not harmful. Just be aware the battery is a specific enhanced type at replacement time.

Why won't AS&G stop my engine in winter?

In cold weather, or when the heater is working hard, or when the battery is not fully charged, AS&G keeps the engine running to protect comfort and the battery. This is expected behaviour.