Skip to main content
Maintenance Procedure
Suzuki SX4 S-Cross Mk1 2013-2021

Suzuki SX4 S-Cross Mk1 (2013–2021) Infotainment Reset

How to force-reboot a frozen SX4 S-Cross SLDA touchscreen and how to do a factory reset from the settings menu.

Make
Suzuki
Model
SX4 S-Cross Mk1
Years
2013-2021
Procedure
Infotainment Reset
Quick answer

To reboot a frozen SX4 S-Cross SLDA touchscreen, press and hold the power/volume knob until the unit powers off and restarts. For a full wipe, go to Settings → General (or Other) → Factory data reset (Restore factory settings) and confirm. The SLDA touchscreen is fitted to higher trims (SZ-T, SZ5); base SZ3/SZ4 cars have a simpler radio without this menu.

Overview

The SX4 S-Cross uses Suzuki's SLDA (Smartphone Linkage Display Audio) Bosch touchscreen on its higher trims. A soft reboot clears most freezes, black screens, reversing-camera faults and Bluetooth problems without losing anything; a factory reset is the step for a system that keeps playing up or before selling the car.

Applies to

2013–2021 Suzuki SX4 S-Cross Mk1 with the SLDA touchscreen (SZ-T, SZ5 trims). Base SZ3/SZ4 cars have a non-SLDA radio without the touchscreen reset menu. Exact submenu labels vary by software version.

What you’ll need

  • No tools required

Step-by-step

  1. Park with the ignition onKeep the car stationary and powered so the head unit stays on during the restart.
  2. Press and hold the power/volume knobHold the power/volume knob until the screen powers off and the unit restarts. Keep holding through the power-off; it typically takes several seconds.
  3. Let it rebootRelease once it restarts. A soft reboot keeps your settings and pairings.
  4. For a full factory reset insteadGo to Settings → General or Other → Factory data reset (Restore factory settings) and confirm. This erases settings and paired devices, so use it only if a reboot did not fix the fault.

Important

  • A factory reset erases settings and paired devices — try a reboot first.
  • Do resets with the car parked.

FAQ

How do I reboot the SX4 S-Cross touchscreen?

Press and hold the power/volume knob until the unit powers off and restarts. This soft reboot keeps your settings and pairings.

How do I factory reset the SLDA system?

Go to Settings → General (or Other) → Factory data reset and confirm. This wipes settings and paired devices, so only use it if a reboot has not solved the issue.

My SX4 has a plain radio, no touchscreen — where's the menu?

The SLDA touchscreen is on higher trims (SZ-T, SZ5). Base SZ3/SZ4 cars have a simpler radio without the SLDA reset menu; you can still power-cycle it but the factory-reset menu is on the touchscreen cars.

Will rebooting delete my Bluetooth pairings?

No. A soft reboot keeps pairings and settings. Only a factory reset removes them.