Skip to main content
Tire Size

255/40R22 Tire Size

The 255/40R22 tire is 30.03 inches (763 mm) in overall diameter. Full dimensions below, plus a calculator to compare it against any other size and see the speedometer effect.

255/40R22 dimensions
Overall diameter762.8 mm · 30.03 in
Section width255 mm · 10.04 in
Sidewall height102.0 mm · 4.02 in
Circumference2396.4 mm · 94.3 in
Revolutions per mile672
Revolutions per km417
Original tire
New tire
-12.34%Not recommended — recalibrate the speedometer
3026.3
Original
Overall diameter762.8 mm · 30.03 in
Sidewall height102 mm
Circumference2,396.4 mm
Revolutions / mile671.6
New
Overall diameter668.7 mm · 26.33 in
Sidewall height105.8 mm
Circumference2,100.8 mm
Revolutions / mile766.1
Speedometer & odometer error

The new tire changes overall diameter by -12.34%. With a speedometer calibrated to the original tire, that same percentage is how far the speedometer and odometer read off — a taller tire means your true speed is higher than indicated and the odometer under-counts distance.

Speedo showsTrue speedSpeedo showsTrue speed
40 km/h35.1 km/h25 mph22 mph
60 km/h52.6 km/h37 mph33 mph
80 km/h70.1 km/h50 mph44 mph
100 km/h87.7 km/h62 mph54 mph
120 km/h105.2 km/h75 mph65 mph

Commonly compared with 255/40R22

FAQ

What is the overall diameter of a 255/40R22 tire?

A 255/40R22 tire has an overall diameter of about 30.03 inches (763 mm) and a section width of 255 mm.

What sizes can replace a 255/40R22 tire?

Sizes within about ±3% of 255/40R22's 30.0-inch diameter are the closest matches, such as 285/35R22, 265/40R22, 265/45R21. Use the calculator above to check the exact speedometer effect of any substitute.

Fitment & trouble codes

Changing tire size by more than about 3% shifts the speedometer, odometer and, on some vehicles, ABS/traction calibration — which can set wheel-speed-sensor or vehicle-speed codes. See C1234 (wheel speed sensor) and C0050 (rear wheel speed) if a warning light appears after a size change.