Skip to main content
Tire Size

285/35R22 Tire Size

The 285/35R22 tire is 29.85 inches (758 mm) in overall diameter. Full dimensions below, plus a calculator to compare it against any other size and see the speedometer effect.

285/35R22 dimensions
Overall diameter758.3 mm · 29.85 in
Section width285 mm · 11.22 in
Sidewall height99.8 mm · 3.93 in
Circumference2382.3 mm · 93.8 in
Revolutions per mile676
Revolutions per km420
Original tire
New tire
-11.82%Not recommended — recalibrate the speedometer
29.926.3
Original
Overall diameter758.3 mm · 29.85 in
Sidewall height99.8 mm
Circumference2,382.3 mm
Revolutions / mile675.6
New
Overall diameter668.7 mm · 26.33 in
Sidewall height105.8 mm
Circumference2,100.8 mm
Revolutions / mile766.1
Speedometer & odometer error

The new tire changes overall diameter by -11.82%. With a speedometer calibrated to the original tire, that same percentage is how far the speedometer and odometer read off — a taller tire means your true speed is higher than indicated and the odometer under-counts distance.

Speedo showsTrue speedSpeedo showsTrue speed
40 km/h35.3 km/h25 mph22 mph
60 km/h52.9 km/h37 mph33 mph
80 km/h70.5 km/h50 mph44 mph
100 km/h88.2 km/h62 mph55 mph
120 km/h105.8 km/h75 mph66 mph

Commonly compared with 285/35R22

FAQ

What is the overall diameter of a 285/35R22 tire?

A 285/35R22 tire has an overall diameter of about 29.85 inches (758 mm) and a section width of 285 mm.

What sizes can replace a 285/35R22 tire?

Sizes within about ±3% of 285/35R22's 29.9-inch diameter are the closest matches, such as 255/40R22, 265/40R22, 265/45R21. Use the calculator above to check the exact speedometer effect of any substitute.

Fitment & trouble codes

Changing tire size by more than about 3% shifts the speedometer, odometer and, on some vehicles, ABS/traction calibration — which can set wheel-speed-sensor or vehicle-speed codes. See C1234 (wheel speed sensor) and C0050 (rear wheel speed) if a warning light appears after a size change.