Skip to main content
Tire Size

265/40R20 Tire Size

The 265/40R20 tire is 28.35 inches (720 mm) in overall diameter. Full dimensions below, plus a calculator to compare it against any other size and see the speedometer effect.

265/40R20 dimensions
Overall diameter720.0 mm · 28.35 in
Section width265 mm · 10.43 in
Sidewall height106.0 mm · 4.17 in
Circumference2261.9 mm · 89.1 in
Revolutions per mile711
Revolutions per km442
Original tire
New tire
-7.12%Not recommended — recalibrate the speedometer
28.326.3
Original
Overall diameter720 mm · 28.35 in
Sidewall height106 mm
Circumference2,261.9 mm
Revolutions / mile711.5
New
Overall diameter668.7 mm · 26.33 in
Sidewall height105.8 mm
Circumference2,100.8 mm
Revolutions / mile766.1
Speedometer & odometer error

The new tire changes overall diameter by -7.12%. With a speedometer calibrated to the original tire, that same percentage is how far the speedometer and odometer read off — a taller tire means your true speed is higher than indicated and the odometer under-counts distance.

Speedo showsTrue speedSpeedo showsTrue speed
40 km/h37.1 km/h25 mph23 mph
60 km/h55.7 km/h37 mph35 mph
80 km/h74.3 km/h50 mph46 mph
100 km/h92.9 km/h62 mph58 mph
120 km/h111.5 km/h75 mph69 mph

Commonly compared with 265/40R20

FAQ

What is the overall diameter of a 265/40R20 tire?

A 265/40R20 tire has an overall diameter of about 28.35 inches (720 mm) and a section width of 265 mm.

What sizes can replace a 265/40R20 tire?

Sizes within about ±3% of 265/40R20's 28.3-inch diameter are the closest matches, such as 275/40R20, 245/45R20, 245/40R20. Use the calculator above to check the exact speedometer effect of any substitute.

Fitment & trouble codes

Changing tire size by more than about 3% shifts the speedometer, odometer and, on some vehicles, ABS/traction calibration — which can set wheel-speed-sensor or vehicle-speed codes. See C1234 (wheel speed sensor) and C0050 (rear wheel speed) if a warning light appears after a size change.