Skip to main content
Tire Size

285/45R19 Tire Size

The 285/45R19 tire is 29.10 inches (739 mm) in overall diameter. Full dimensions below, plus a calculator to compare it against any other size and see the speedometer effect.

285/45R19 dimensions
Overall diameter739.1 mm · 29.10 in
Section width285 mm · 11.22 in
Sidewall height128.3 mm · 5.05 in
Circumference2322.0 mm · 91.4 in
Revolutions per mile693
Revolutions per km431
Original tire
New tire
-9.53%Not recommended — recalibrate the speedometer
29.126.3
Original
Overall diameter739.1 mm · 29.1 in
Sidewall height128.3 mm
Circumference2,322 mm
Revolutions / mile693.1
New
Overall diameter668.7 mm · 26.33 in
Sidewall height105.8 mm
Circumference2,100.8 mm
Revolutions / mile766.1
Speedometer & odometer error

The new tire changes overall diameter by -9.53%. With a speedometer calibrated to the original tire, that same percentage is how far the speedometer and odometer read off — a taller tire means your true speed is higher than indicated and the odometer under-counts distance.

Speedo showsTrue speedSpeedo showsTrue speed
40 km/h36.2 km/h25 mph22 mph
60 km/h54.3 km/h37 mph34 mph
80 km/h72.4 km/h50 mph45 mph
100 km/h90.5 km/h62 mph56 mph
120 km/h108.6 km/h75 mph67 mph

Commonly compared with 285/45R19

FAQ

What is the overall diameter of a 285/45R19 tire?

A 285/45R19 tire has an overall diameter of about 29.10 inches (739 mm) and a section width of 285 mm.

What sizes can replace a 285/45R19 tire?

Sizes within about ±3% of 285/45R19's 29.1-inch diameter are the closest matches, such as 235/60R18, 255/55R18, 255/50R19. Use the calculator above to check the exact speedometer effect of any substitute.

Fitment & trouble codes

Changing tire size by more than about 3% shifts the speedometer, odometer and, on some vehicles, ABS/traction calibration — which can set wheel-speed-sensor or vehicle-speed codes. See C1234 (wheel speed sensor) and C0050 (rear wheel speed) if a warning light appears after a size change.