Skip to main content
Tire Size

295/40R20 Tire Size

The 295/40R20 tire is 29.29 inches (744 mm) in overall diameter. Full dimensions below, plus a calculator to compare it against any other size and see the speedometer effect.

295/40R20 dimensions
Overall diameter744.0 mm · 29.29 in
Section width295 mm · 11.61 in
Sidewall height118.0 mm · 4.65 in
Circumference2337.3 mm · 92.0 in
Revolutions per mile689
Revolutions per km428
Original tire
New tire
-10.12%Not recommended — recalibrate the speedometer
29.326.3
Original
Overall diameter744 mm · 29.29 in
Sidewall height118 mm
Circumference2,337.3 mm
Revolutions / mile688.5
New
Overall diameter668.7 mm · 26.33 in
Sidewall height105.8 mm
Circumference2,100.8 mm
Revolutions / mile766.1
Speedometer & odometer error

The new tire changes overall diameter by -10.12%. With a speedometer calibrated to the original tire, that same percentage is how far the speedometer and odometer read off — a taller tire means your true speed is higher than indicated and the odometer under-counts distance.

Speedo showsTrue speedSpeedo showsTrue speed
40 km/h36 km/h25 mph22 mph
60 km/h53.9 km/h37 mph34 mph
80 km/h71.9 km/h50 mph45 mph
100 km/h89.9 km/h62 mph56 mph
120 km/h107.9 km/h75 mph67 mph

Commonly compared with 295/40R20

FAQ

What is the overall diameter of a 295/40R20 tire?

A 295/40R20 tire has an overall diameter of about 29.29 inches (744 mm) and a section width of 295 mm.

What sizes can replace a 295/40R20 tire?

Sizes within about ±3% of 295/40R20's 29.3-inch diameter are the closest matches, such as 235/55R19, 265/50R19, 295/35R21. Use the calculator above to check the exact speedometer effect of any substitute.

Fitment & trouble codes

Changing tire size by more than about 3% shifts the speedometer, odometer and, on some vehicles, ABS/traction calibration — which can set wheel-speed-sensor or vehicle-speed codes. See C1234 (wheel speed sensor) and C0050 (rear wheel speed) if a warning light appears after a size change.