Skip to main content
Tire Size

285/55R20 Tire Size

The 285/55R20 tire is 32.34 inches (822 mm) in overall diameter. Full dimensions below, plus a calculator to compare it against any other size and see the speedometer effect.

285/55R20 dimensions
Overall diameter821.5 mm · 32.34 in
Section width285 mm · 11.22 in
Sidewall height156.8 mm · 6.17 in
Circumference2580.8 mm · 101.6 in
Revolutions per mile624
Revolutions per km387
Original tire
New tire
-18.6%Not recommended — recalibrate the speedometer
32.326.3
Original
Overall diameter821.5 mm · 32.34 in
Sidewall height156.8 mm
Circumference2,580.8 mm
Revolutions / mile623.6
New
Overall diameter668.7 mm · 26.33 in
Sidewall height105.8 mm
Circumference2,100.8 mm
Revolutions / mile766.1
Speedometer & odometer error

The new tire changes overall diameter by -18.6%. With a speedometer calibrated to the original tire, that same percentage is how far the speedometer and odometer read off — a taller tire means your true speed is higher than indicated and the odometer under-counts distance.

Speedo showsTrue speedSpeedo showsTrue speed
40 km/h32.6 km/h25 mph20 mph
60 km/h48.8 km/h37 mph30 mph
80 km/h65.1 km/h50 mph40 mph
100 km/h81.4 km/h62 mph51 mph
120 km/h97.7 km/h75 mph61 mph

Commonly compared with 285/55R20

FAQ

What is the overall diameter of a 285/55R20 tire?

A 285/55R20 tire has an overall diameter of about 32.34 inches (822 mm) and a section width of 285 mm.

What sizes can replace a 285/55R20 tire?

Sizes within about ±3% of 285/55R20's 32.3-inch diameter are the closest matches, such as 275/55R20, 275/60R20, 305/55R20. Use the calculator above to check the exact speedometer effect of any substitute.

Fitment & trouble codes

Changing tire size by more than about 3% shifts the speedometer, odometer and, on some vehicles, ABS/traction calibration — which can set wheel-speed-sensor or vehicle-speed codes. See C1234 (wheel speed sensor) and C0050 (rear wheel speed) if a warning light appears after a size change.