Skip to main content
Tire Size

285/60R20 Tire Size

The 285/60R20 tire is 33.46 inches (850 mm) in overall diameter. Full dimensions below, plus a calculator to compare it against any other size and see the speedometer effect.

285/60R20 dimensions
Overall diameter850.0 mm · 33.46 in
Section width285 mm · 11.22 in
Sidewall height171.0 mm · 6.73 in
Circumference2670.4 mm · 105.1 in
Revolutions per mile603
Revolutions per km374
Original tire
New tire
-21.33%Not recommended — recalibrate the speedometer
33.526.3
Original
Overall diameter850 mm · 33.46 in
Sidewall height171 mm
Circumference2,670.4 mm
Revolutions / mile602.7
New
Overall diameter668.7 mm · 26.33 in
Sidewall height105.8 mm
Circumference2,100.8 mm
Revolutions / mile766.1
Speedometer & odometer error

The new tire changes overall diameter by -21.33%. With a speedometer calibrated to the original tire, that same percentage is how far the speedometer and odometer read off — a taller tire means your true speed is higher than indicated and the odometer under-counts distance.

Speedo showsTrue speedSpeedo showsTrue speed
40 km/h31.5 km/h25 mph20 mph
60 km/h47.2 km/h37 mph29 mph
80 km/h62.9 km/h50 mph39 mph
100 km/h78.7 km/h62 mph49 mph
120 km/h94.4 km/h75 mph59 mph

Commonly compared with 285/60R20

FAQ

What is the overall diameter of a 285/60R20 tire?

A 285/60R20 tire has an overall diameter of about 33.46 inches (850 mm) and a section width of 285 mm.

What sizes can replace a 285/60R20 tire?

Sizes within about ±3% of 285/60R20's 33.5-inch diameter are the closest matches, such as 305/55R20, 275/60R20, 275/65R20. Use the calculator above to check the exact speedometer effect of any substitute.

Fitment & trouble codes

Changing tire size by more than about 3% shifts the speedometer, odometer and, on some vehicles, ABS/traction calibration — which can set wheel-speed-sensor or vehicle-speed codes. See C1234 (wheel speed sensor) and C0050 (rear wheel speed) if a warning light appears after a size change.