Skip to main content
Tire Size

325/65R20 Tire Size

The 325/65R20 tire is 36.63 inches (931 mm) in overall diameter. Full dimensions below, plus a calculator to compare it against any other size and see the speedometer effect.

325/65R20 dimensions
Overall diameter930.5 mm · 36.63 in
Section width325 mm · 12.80 in
Sidewall height211.3 mm · 8.32 in
Circumference2923.3 mm · 115.1 in
Revolutions per mile551
Revolutions per km342
Original tire
New tire
-28.14%Not recommended — recalibrate the speedometer
36.626.3
Original
Overall diameter930.5 mm · 36.63 in
Sidewall height211.3 mm
Circumference2,923.3 mm
Revolutions / mile550.5
New
Overall diameter668.7 mm · 26.33 in
Sidewall height105.8 mm
Circumference2,100.8 mm
Revolutions / mile766.1
Speedometer & odometer error

The new tire changes overall diameter by -28.14%. With a speedometer calibrated to the original tire, that same percentage is how far the speedometer and odometer read off — a taller tire means your true speed is higher than indicated and the odometer under-counts distance.

Speedo showsTrue speedSpeedo showsTrue speed
40 km/h28.7 km/h25 mph18 mph
60 km/h43.1 km/h37 mph27 mph
80 km/h57.5 km/h50 mph36 mph
100 km/h71.9 km/h62 mph45 mph
120 km/h86.2 km/h75 mph54 mph

Commonly compared with 325/65R20

FAQ

What is the overall diameter of a 325/65R20 tire?

A 325/65R20 tire has an overall diameter of about 36.63 inches (931 mm) and a section width of 325 mm.

What sizes can replace a 325/65R20 tire?

Sizes within about ±3% of 325/65R20's 36.6-inch diameter are the closest matches, such as 285/65R20, 275/65R20, 285/60R20. Use the calculator above to check the exact speedometer effect of any substitute.

Fitment & trouble codes

Changing tire size by more than about 3% shifts the speedometer, odometer and, on some vehicles, ABS/traction calibration — which can set wheel-speed-sensor or vehicle-speed codes. See C1234 (wheel speed sensor) and C0050 (rear wheel speed) if a warning light appears after a size change.